Allen Bradley C22539 Ultra Plus Power Supply Module 1398-PSM-125C Servo Drive
Ultra Plus Power Supply Module
Model #: C22539
Alternate #: 1398-PSM-125C
The Allen-Bradley 1398-PSM-125C is a 1398 Ultra Plus Series power supply module. It requires a three-phase 2 input power and 100-240V AC. Optional isolation is available with this module with the use of a transformer. Its AC input frequency is 47-63 Hz and its output voltage is 100-340V DC, but it is 325V DC when using a 230V DC input. This module also has a nominal AC input current of 82A and a maximum inrush current of 100A with a 230V AC, 3-phase input for both. It also has a peak DC output current of 450A and a continuous DC output current of 100A. The 1398-PSM-125C module has a peak shunt power of 40 kW and a continuous shunt power of 1.2 kW.
This module has an operating temperature of 0-55 ÃÅ¡C and a storage temperature of 40-70 ÃÅ¡C. It has an operating altitude of 1500 m or 5000 ft, with a derating of 3% for every 300 m above 1500 m, and a non-condensing relative humidity of 5-95%. The 1398-PSM-125C’s non-operating shock is 15 g and operating/non-operating vibration is 2.5 g at 5-2000 Hz with a maximum displacement of 0.015 inches.
No further adjustment is needed with the 1398-PSM-125C module. It also has the capacity for self-protection and comes with connections for the dissipative shunt regulator. This regulator provides a quick discharge of DC bus capacitors as well as assists in the absorption of rotational energy. It can be shared with multiple servo drives as well as compatible motors.
Note that there are specific requirements for the 1398-PSM-125C module can be installed. It needs to be enclosed in a grounded conductive enclosure that has built-in protection to prevent mishandling by the operator or an unskilled person. It is also suggested that the module be placed at the center between drives and that the highest power drives should be closest to the module to minimize the DC bus inductance. The ambient temperature where it will be installed should only be 55 ÃÅ¡C or less and the panel should be placed on a flat and rigid surface that will not be subjected to vibration, oil, dust, and vapors. You should also make sure that it has ample space for ventilation and easy access.
- Input 100-240VAC
- Output 100-340VDC
This Item Is Being Sold as USED and is guaranteed to work as designed, or money back.
- In Stock: 12
- Brand: Allen-Bradley
- Condition: Used
- Notes: Used Unit In Good Condition
- SKU: 18060017
- Manufacturer Part Number: C22539
- Alternate Part Number: Ultra Plus
- Manufacturer: Allen-Bradley
- Listed By: TDM
- Location: Unit 2
- MPN: C22539